Vol. 1 No. 1 (2026)
Implementing Random-Field Reliability Analysis in MATLAB for Soil-Nailed Slope Stability: A Reproducible Workflow
Abstract
This paper presents a complete, reproducible MATLAB workflow for random-field (RF) reliability analysis of soil-nailed slopes. The implementation integrates four main software modules: a data-structure builder (inputData), a Karhunen–Loève random field generator (randomfield), a slice-based slope stability solver (soilCalc), and interchangeable reliability engines (FORM via slopeBeta; Monte Carlo Simulation via a custom MCS driver; Adaptive Radial Based Importance Sampling via ARBIS). The allData structure serves as the central data carrier, passing geometric, soil, nail, and probabilistic parameters between modules without global variables. Worked code excerpts from each module are presented alongside annotated pseudocode. Results demonstrate that spatially variable cohesion and friction angle, discretised over a 10-slice mesh, yield probability of failure estimates between 7% and 46%—values that conventional scalar-parameter FORM analysis cannot reproduce. The workflow is designed for transparency and replication; each function is self-contained with well-defined inputs and outputs.
Read the Full Article
The HTML galley is loaded below for inline reading and better discovery.
How to Cite
Keywords
Research Snapshot
Desktop reading viewReferences
- Bellin, A. (1991). Numerical generation of random fields with specified spatial correlation structure. Internal Report No. IDR 2/1991, University of Trento, Italy.
- Vanmarcke, E. H. (1983). Random Fields – Analysis and Synthesis. MIT Press, Cambridge, MA.
- [ 3] Baecher , G. B. and Christian, J. T. (2003). Reliability and Statistics in Geotechnical Engineering. John Wiley & Sons, Chichester.
- Sudret, B. and Der Kiureghian, A. (2002). Comparison of finite element reliability methods. Probabilistic Engineering Mechanics, 17, 337–348.
- ] Enevoldsen , I. and Sørensen, J. D. (1994). Reliability-based optimization in structural engineering. Structural Safety, 15(3), 169–196.
- ] Phoon , K. K. and Kulhawy, F. H. (1999). Characterisation of geotechnical variability. Canadian Geotechnical Journal, 36, 612–624.
- ] Griffiths , D. V. and Fenton, G. A. (2009). Probabilistic settlement analysis by stochastic and random finite element methods. Journal of Geotechnical and Geoenvironmental Engineering, 135(11), 1629–1637.
- ] El -Ramly, H., Morgenstern, N. R. and Cruden, D. M. (2002). Probabilistic slope stability analysis for practice. Canadian Geotechnical Journal, 39, 665–683.
- ] Phoon , K. K. (2008). Reliability-Based Design in Geotechnical Engineering. Taylor & Francis, London.
- ] Duncan , J. M. (2000). Factor of safety and reliability in geotechnical engineering. Journal of Geotechnical and Geoenvironmental Engineering, 126(4), 307–316.
- ] Taib , S. N. L. (2010). A review of soil nailing approaches. UNIMAS E-Journal of Civil Engineering, 1(2).
- ] Rackwitz , R. (2000). Reviewing probabilistic soils modelling. Computers and Geotechnics, 26, 199–223.